Eeger Beever 1821 Brush Chipper

General

Height: 8’11” wheeled (2.72 m)/ 8’6″ tracked (2.59 m)
Width: 7’3″ wheeled (2.21 m)/ 7’10” tracked (2.39 m)
Length: 18’1″ wheeled (5.51 m)/ 16′ tracked (4.88 m)

Gross weight (approximate): 8,900 lb wheeled (4,036 kg)/ 13,500 lb tracked (6,125 kg)
Suspension: 9,000 lb Torflex (4,082 kg)

Infeed opening: 41″ high x 59″ wide (104.1 cm x 149.9 cm)
Throat opening: 18″ high x 20.5″ wide (45.7 cm x 52.1 cm)

Drum: 23.75″ wide x 30″ diameter (60.32 cm x 76.2 cm)

Engine: CAT, Perkins, or PSI
Horsepower: 147–174 HP (109.6—129.8 kW)

Fuel capacity: 32 gallons (121.1 litre)
Hydraulic oil capacity: 12 gallons wheeled (45.2 litres)/ 26 gallons tracked (98.4 litres)

Frame: 8.2 lb. 6″ channel wheeled (3.72 kg., 15.24 cm channel)/ 6″ x 2″ x .25″ wall tube (15.24 cm x 5.08 cm x 6.35 mm)

Tires : (2) 215/75Rx17.5 / 400 mm rubber track undercarriage

Hitch: 2.5″ Pintle (6.35 cm)

Equipment Highlights

Dual horizontal feed wheels with TorqMax top feed wheel compression system, hydraulic lift assist, Variable Force constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle and direct drive bottom feed wheel with torque arm coupler

Live hydraulic system including: ball valve, pump, motor, and valve bank with additional pre-plumbed valve section for installation of an aftermarket winch package

3″ x 5″ (7.62 cm x 12.7 cm)  tubular steel telescoping drawbar with two 12″ (30.48 cm) extensions

Options

• ChipSafe® Operator Safety Shield
• Winch package: heavy-duty, 5,000 lb (2,268 kg) pull capacity with rope and 10′ chafe guardCustom Paint and Logo Packages
• Bottom Bump Bar
• Hydraulic Swivel Discharge
• Cone Holder
• Spare Tire and Mount
• Folding Infeed Tray
• Flow Control
• Axle Options Available
• Chocks and Chock Holder
• Strobe Light
• Infeed Curtain
• Pusher Paddle
• Front and Rear Stabilizers